The Aquabeve IB210R Bottled Water Cooler is a hot and cold hydration solution built for offices, breakrooms, waiting areas, and commercial environments that require consistent everyday performance. Sharing the same upgraded internal architecture as the IW210R; featuring stainless steel hot and cold tanks, a reinforced refrigeration system, and improved structural supports. Finished in a modern black exterior. The result is a reliable, low-maintenance bottled water cooler that performs across both customer-facing and back-of-house environments.
Key Features
- 2.0L / 0.53-gallon stainless steel hot tank with stainless steel fittings between the hot and cold tanks for durability and sanitation.
- 3.78L / 1.0-gallon polished stainless steel cold tank with laser-welded joints and seams for dependable chilled-water performance.
- "D" shaped copper evaporator tubing increases tank contact surface area to improve cold water performance and recovery.
- Evaporator copper tubing thickness increased by 33% to improve longevity and resistance to refrigerant leaks.
- Dispense point is 4 inches higher than previous configurations, providing easier bottle and cup clearance during use.
- Aluminum silicate fiber blanket insulation on the hot tank helps prevent dry burn and improves insulation efficiency.
- Upgraded internal supports improve structural durability and help reduce shipping and handling damage.
- Larger rear cabinet opening allows easier chassis access for service and maintenance.
- No external base plate; updated lock-in baffle and baffle nut design provide improved internal stability.
- No Leak EZ-Fill patented no-spill adapter is designed for use with no-spill bottle caps and features increased strength and structure to eliminate cracking.
- Sleek black finish suitable for modern offices, retail environments, and commercial spaces. Cup dispenser optional.
Technical Specifications
- Product Type: Bottled water cooler, hot and cold
- Model: IB210R
- Voltage: 110V / 115V / 220V
- Frequency: 50/60 Hz
- Power Consumption: 4.89A / 554W / 115V
- Cold Power Consumption: 1.44A / 118W / 115V
- Hot Power Consumption: 3.87A / 449W / 115V
- Energy Use: 0.86 kWh / 24 hrs.
- Average Hot Water Temperature at Nozzle: 167°F +/- 9°F cut-in / 187°F +/- 4°F cut-out
- Hot Water Flow Rate: 0.67 – 0.73 oz./sec
- Hot Tank Size: 2.0L
- Heat Band Wattage: 450W
- Average Cold Water Temperature at Nozzle: 45.87°F cut-in / 42.2°F cut-out
- Cold Water Flow Rate: 1.4 oz./sec
- Cold Tank Size / Usable Volume / Below Baffle Volume: 3.78L / 2.08L / 1.51L : 1 gal. / 0.55 gal. / 0.4 gal.
- Unit Dimensions (W x D x H): 12.4 x 13.78 x 42.91 inches
- Boxed Dimensions (W x D x H): 13 x 13.9 x 43.9 inches
- Net Weight: 31 lbs.
- Gross Weight: 33 lbs.
- Dispense Height: 32.5 inches
- Max Distance from Drip Tray to Faucet: 7.8 inches
- Certifications & Standards
- The IB210R is third-party safety certified through Intertek and carries the eTL Listed mark, confirming compliance with applicable North American electrical product safety standards.
Use Cases
- This bottled water cooler is well-suited for:
- Office breakrooms, reception areas, and administrative spaces that need dependable hot and cold bottled water dispensing.
- Healthcare, wellness, and waiting-room environments where clean presentation and reliable daily hydration access are important.
- Retail counters, service departments, and showroom spaces that benefit from a polished freestanding water solution.
- Light commercial, warehouse office, and back-of-house settings that need a durable cooler with straightforward service access.
- General workplace hydration programs using standard bottled water service with no-spill bottle caps.
Compatibility - The IB210R is designed for use with standard bottled water applications and includes a No Leak EZ-Fill no-spill adapter for use with no-spill bottle caps. It is well suited for 3- and 5-gallon bottled water setups commonly used in office coffee service, workplace hydration, and commercial water delivery programs. An optional cup dispenser is also available.
Need help confirming compatibility? - Contact your HHD representative by phone or via the Customer Support chat on your screen.
Certifications and Compliance - The ETL Listed mark indicates the product has been tested by Intertek and found in compliance with accepted national standards. The unit's stainless steel hot and cold tanks, reinforced internal support structure, and upgraded evaporator tubing support dependable long-term operation in commercial beverage and workplace hydration environments.
Warranty - Models IB210R and IW210R include a 3-year warranty on the sealed refrigeration system and a 2-year warranty on parts, including electrical components such as cold controls, relay overloads, and PCBs .
Electrical
Voltage
Dimensions
Length
13 in
Width
12.50 in
Height
39.75 in
Weight
80 lb
Spec Sheet