Keating MG2 30 Hot Gas Plate 30"

Keating 032886 Natural Gas Hot Plate MG-2, 30"

Standard Features:

• Available in gas or electric, with two or four burners
• Gas model features 15,000 BTU/hr. input
• Electric model features infi nite controls at 240V per element
• Compact size is perfect for Kiosks

Gas Requirements:

• Burner / Elements: 2
• BTU Input / Burner: 15,000

Dimensions:

• Height: 16 5/8"
• Depth: 30 1/2"
• Width: 13"
• Weight: 140 lbs.
• Working Height: 12"

Options:

• Stainless Steel Finish
• Extended Fronts
• Matching Dummy Cabinets
• Spark Ignition for Natural Gas Hot Plates
• 480 Voltage (for 30" Only)

Keating heavy duty Hot Plates are designed to provide the energy input needed to heat up quickly, and the control to maintain temperature.

Performance
The MG-2 and MG-4 gas models deliver 15,000 BTU/hr. input per burner at 4" water column pressure. The Keating electric models provide 2600 watts per element operating on a 240 volt line.

Compact size
The MG-2 is only 13" wide by 24" or 30" deep. The MG-4 is 26" wide. A perfect size for equipment stands or in a Keating Custom Line-Up, the Hot Plate complements any kitchen decor.

Rugged design
The Hot Plate gas models feature removable grates and drip pans and stainless steel burners. Electric models utilize heavy duty coil elements which are 7-1/2" in diameter.

Options
Options include stainless steel fi nish, extended fronts, matching dummy cabinets, spark ignition for Natural Gas Hot Plates, and 480 voltage (for 30" only).

GAS MODEL SPECIFICATIONS
The Keating Hot Plate is available with 2 (MG 2) or 4 (MG 4) burners in a cabinet with a splashback. Each burner is rated at 15,000 BTU/hr.

• Burner - Stainless Steel burners, rated at 15,000 BTU/hr. The MG 4 has four burners.
• Grates - Cast iron grates, removable for cleaning.
• Burner Control - Manual gas valves (infi nite controls) are mounted in the front with constant pilots. Spark ignitors are available.
• Drip Tray - The drip tray is removable from the front for easy cleaning.
• Gas Connection - 3/4" NPT male connection located in the rear of the unit.

Note: Special order may include Spark Ignition (gas models) and 480 voltage for 30" only.

INSTALLER - Check plumbing and gas codes for proper gas supply line sizing to sustain burner pressure when all gas appliances are full on. Supply pressure must NOT be above 13.84" WC or gas valve damage may occur.

A minimum of 24" at the front of the unit should be allowed for servicing and operation; a minimum of 6" on each side and at the rear of each unit for combustible materials.

(Product Shown MG-2 Gas)